Your cart is empty!
Search in product descriptions
Hioki MR8847-53 Memory recorder with 8 analogue and 32 logic channels (only 16 logic probes supplied). High-speed 20MS/s,Fully Isolated Memo..
Hioki PW3360-21 power logger supports single to three phase 4 wire circuits. Supplied with 3x 500 A CTs 5/10/50/100/500 A ranges 0.3% rdg..
Premium Power Quality Analyser for demanding applications. Includes 3 x 1000A ac CTs and 1 x 200A ac/dc CT. Ideal for ac mains studies as..
Measures voltage, current, power, power factor, harmonics and integrated values. Simultaneously performs demand measurements required for..
Low frequency field meter designed to evaluate electric & magnetic fields associated with 50hz power lines. Frequency range 50 - 1000 ..
Three orthogonal field sensors. Dynamic range 0.2 mG~20 G. True RMS detection. Frequency range 5 Hz~2 kHz with an in-built 30 Hz high pass..
Alpha, Beta, Gamma and X-ray radiation monitor. Meter, LED, audible indication and detachable probe. Range 0.1 to 1,000,000 CPM; Accuracy..
Optional Accessory for HVD,HVA60-DC/VLF and HVD,HVA90_DC-VLF. Tan Delta or Power Factor tester used to determine the power factor of cabl..
Optional Accessory for HVD,HVA60-DC/VLF and HVD,HVA90_DC-VLF. Tan Delta or Power Factor tester used to determine the power factor of cables,..
VLF(0.1Hz), DC(+/-), cable fault conditioning (burning), and sheath/jacket testing mode all included. 0.1Hz & 0.02Hz. For solid diele..
VLF and DC test capabilities combined in one unit (60 kg). Suitable for testing cables (XLPE, PE, EPR, PILC etc), capacitors, switchgear,..
VLF, DC and Jacket/Sheath testing. Sinusoidal: 0 - 94 kV peak, 0 - 66 kV rmsDC: ± 0 - 90 kV and Squarewave: 90 kV. The high power HVA94 Test..
Microthermal conductivity gas detector. Reading in cc/sec, g/yr, mg/m3 or ppm. Detects most gases however particularly suited to ammonia,..
ISA Circuit Breaker Analyser, 16 timing channels (6 main contacts, 6 Resistive contacts, 4 Aux contacts), up to 3 trip/1 close coils, mot..
The JDSU MTS-2000 Multi-Test Platform with FiberComplete™ module is ideal for field technicians looking to perform traditional fibre qualifi..
Field tester for the installation, commissioning and fault finding of fibre and copper SDH/PDH networks from 1.5Mb/s to 2.5 Gb/s. Optical..
JDSU HST-3000 with Broadcom Bonded module (SIM) for complete copper testing from POTS to full spectrum Very High Speed Digital Subscriber..
JDSU,MTS-2000 with JDSMTS-4136MA-FCOMP-SCA OTDR module. Maintain metro and PON-based FTTx networks. 1310, 1550 and 1625 nm wavelengths at..
JDSU OLP-55 Optical Power Meter BN 2277/01 Power & Loss Measurement for installation, maintenance and repair of fiber optics networks..
JDSU OLP-87 PRO is a FTTx/PON power meter with P5000i inspection probe. Used for qualification, activation, inspection and troubleshootin..
Compact Temperature Calibrator. Lightweight, Portable for Lab and General Use. Temperature Range: 572 to 2200F (300 to 1205C). Excellent ..
NATA calibrated Jofra CTC-1205A dry well temperature calibrator. Range 100 to 1,205 degC. Accuracy +/- 2 degC, stability +/-0.1 ..
Ametek Jofra CTC-660A Dry Block Temperature Calibrator with NATA certification. Range of 28 to 660°C. Accuracy +/-0.85°C, stability +/-0...
Various insert sizes for the Jofra CTC-660A. Please inquire...
The Gecko Blast seismograph is an easy-to-use, all-in-one blast monitor with internal triaxial 4.5 Hz geophones. With simple installation an..
The Keysight 33612A, 80 MHz, 2 channel waveform generator measures sine, square, pulse, ramp, triangle, Gaussian noise, PRBS and arbitrar..
Precision 6.5 digit Multimeter. 100% drop-in 34401A compatibility, graphical views of your measurement results, long-term trends and meas..
The Keysight 34980A Multifunction Switch/Measure Unit is a flexible, reliable switching and data acquisition platform. Suitable in design..
3 GHz frequency counter. Option 010 high stability timebase included. HPIB interface.
Programmable dc Source. 0 to 20 V, 0 to 5 A. Built-in advanced measurement system to accurately measure battery current drains. Battery em..
4 channel 200 MHz digital storage oscilloscope. Sampling rate 2 G/s (4 G/s half-channel interleaved mode). 2 Mpts memory depth, waveform ..
Power meter, for peak, average, peak-to-average ratio and time-gated measurements. 100 uW to 25 W (-70 dBm to 44 dBm), 9 kHz to 110 GHz (p..
Keysight E5071C-260, 2 port 9 kHz to 6.5 GHz network analyser with integral S-parameter test set. Dynamic range >123 dB. High stability..
1 GHz 4 + 16 channel mixed signal oscilloscope (MSO). 4 Gsa/s. XGA Colour display updates 100,000 waveforms/s with 256 levels intens..
1 GHz 4 + 16 channel mixed signal oscilloscope (MSO). 5 Gsa/s. XGA Capacitive touch Colour display updates 1,000,000 waveforms/s with 64 lev..
Keysight MXG-X RF Analogue Signal Generator, 9 kHz to 6 GHz, -144 to +19 dBm. Features fast switching, low phase noise, pulse, and narrow ..
The Keysight N6702A Low Profile Modular Power System Mainframe comes with 2 x N6762A precision dc power modules (100 W), 1 U high. Each m..
Keysight N9344C spectrum analyser 9 kHz to 20 GHz with 5 MHz to 7 GHz tracking generator. -144 dBm displayed average noise level (DANL), &..
Agilent/Keysight N9344C spectrum analyser 9 kHz to 20 GHz with GPS. -144 dBm displayed average noise level (DANL), <0.95 s sweep time ..
With up to 2 GSa/s sampling rate and 2 Mpts memory depth, this 200 MHz two channels handheld scope captures more waveforms from signals s..
1000 watt electronic load. Voltage range 1.5 to 120V. Current range 0 to 200A. Provides constant current, resistance, voltage, and power ..
Hipot testing up to 10kV in either DC or AC. Digital voltmeter and ammeter, digital timer. Window comparator for more reliable pass/fail ..
Kingfisher singlemode light source KI-28010 and power meter KI-2600. Compatible with APC and PC singlemode networks. Wavelengths 1310, 15..
Kit consists of Encircled Flux (EF) compliant test reference leads suitable for use with the Fluke CertiFiber Pro Optical Loss Test Set on t..
Kit consists of Encircled Flux (EF) compliant test reference leads for the following fibre networks:
- SC, ST 62.5 um (OM1 &..
The MadgeTech TSR101-EB-5 transport logger with 5g triaxial accelerometer. Extended battery option gives the device a 30 day battery life. ..
Range 0~1000N accuracy 0.1%. 5 digit back lit display. Peak data sampling rate 5kHz. 120% overload warning, display invert (reverse) func..
Portable (22 kg, 38 kg with accessories and transport case) battery discharge load unit. Works with 12 V to 480 V battery systems and can..
The Megger MWA330A Winding Resistance Analyser combines TTR and resistance testing in a single unit. It performs the following tests: three-..
Provides reliable cable identification for both energised and non-energised cables. It can generate pulses on 440 V 3 phase cables.
Megger Digital Low Resistance Ohmmeter 10A/0.1microohm-2KOhm Self contained automatic micro-ohm meter, selecting the most suitable test cu..
Measures resistance between 0.1 micro-Ohms and 1Ohm, at high currents. Provides test currents from 10A to 600A subject to the load resist..
For Megger DLRO digital micro-ohm meters, potential spike lead set 2 x 2m long & current clip lead set 2 x 2m. These are used to sepa..
For Megger DLRO 10 series digital microohm meters. Specially designed for measuring resistance of lightning protection circuit between wi..
Megger DLRO100XB - 100A lightweight, mains and battery operated digital low resistance ohmmeter. Unit is supplied with 5m kelvin lead set, D..
Simple rotary switch selection of five test modes, including auto start on connection. The unit is powered from either its rechargeable batt..
Test current range 10A to 200Adc. Measurement range 0.1micro-Ohm to 1Ohm, resolution 0.1micro-Ohm. Current cables 2 x 5m. Internal memory..
Megger EZ-Thump 12 kV Hipot tester, TDR and Thumper. This unit is designed as a portable cable fault finder. It operates off either ac su..
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to..
The Megger MIT1025 is a 10 kV Insulation Resistance Tester (IRT) capable of resistance measurements up to 20 Tohm. Testing options include P..
We are open for business as we fall under permitted services list from 2 June 2020.
Electronic test and measurement equipment rental for the professional Offering a wide range of well maintained conveniently located test instruments. Suitable for many applications in electronic, RF and data telecommunications, electrical power, general instrumentation and environmental areas.
Rent from our global inventory of over 10,000 items from well known manufacturers – Agilent, Fluke, Megger, Panametrics, CHK, Hioki, Anritsu, Testo, TSI and many more.TechRentals has technical sales people who can offer you a solution to your specific needs assisting you to get your job done right the first time. TechRentals provides a 24 hours "NO RISK GUARANTEE."Please view a sample of the popular rental equipment available from TechRentals below.
Olympus OmniScan MX2 Phased Array Flaw Detector
Olympus MultiScan MS5800 Tube inspection System
Proceq GPR-Live PRO Concrete Ground Penetrating Radar DA
Flir E75 Infrared Thermal Image Camera
GE Mentor EM Dual Eddy Current Flaw Detector
HV Diagnostics HVA30 30kV VLF/DC Test Set
OMICRON CMC 356 Advanced Protection Relay Test Set
Fluke 1738 Power & Energy Logger
Anritsu MS2712E portable hand held spectrum analyser 9 kHz to 4 GHz, DANL -162 dBm in 1 Hz RBW, RBW 1 Hz to 3 MHz. Tracking generator -50 ..
The Emerson AMS Trex is an intrinsically safe HART and Foundation Fieldbus device communicator. It allows technicians to configure, isola..
Testo 340 Portable Flue Gas Analyser. Includes O2, CO (h2 compensated), NO and NO2 sensors. Features a 335 mm engine probe suitable for d..
Includes 610 x 610, 360 x 360, 305 x 1220, 610 x 1220 hoods and stand and 500 mm pitot tube. Measures 40 to 4000 m3/hr ±3%, Temperature 0..
The Fluke 1587 Insulation Multimeters combine a digital insulation tester with a full-featured True RMS digital multimeter. Insutation: M..
Microwave antenna and cable test set. Portable single port analyser, providing return loss (SWR) insertion loss and distance to fault meas..
Power Quality Analyser to suit a broad range of ac mains studies. Includes 4 x 600/6000A ac CTs. A unique energy loss calculator provides..
The Fluke DSX-5000 1 GHz cable analyser copper test solution enables testing and certification of twisted pair cabling for up to 10 GigE ..