Your cart is empty!
TechRentals offers flexible rental plans with periods from a day to a year or more. Purchase options are also available. Inventory is held in Malaysia and Australia with the latter being available at short notice and being more viable for longer rental periods. Please enquire.
Druck DPI 620 Genii advanced modular pressure calibrator with HART, includes pneumatic pressure station with 1/8 BSP(G) or 1/8 NPT test p..
Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. Generates from..
Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. 0 to 100 bar, acc..
Hydraulic pressure calibrator including pump and current voltage standard. Pressure range 0 - 350 bar (5000 psi) +/- 0.005% FS. Voltage inpu..
Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. 0 to 70 bar, accu..
Fully self-contained pressure test and calibration system combines pressure generation, signal measurement, and loop power. Generates fro..
Druck DPI620 Genii advanced modular pressure calibrator with HART, includes hydraulic pressure station with 1/8 BSP(G) or 1/4 NPT test po..
Provides up to 700 Bar hydraulic, 40 Bar pneumatic pressures and vacuum to -950 mBar. Built-in stroke adjuster, lower pressure fine contr..
Multi-function Partial Discharge (PD) Instrument. It measures accurate PD activity using the UltraTEV detector and an ultrasonic detector. ..
Easy-Laser XT660 use dot laser technology with single axis TruePSD 20x20mm detectors. Measurement resolution of 0.001mm with max. measuremen..
Elcometer 266 High Voltage Detector Accessories consist of:- T99922746 - Stainless steel rolling spring holder- T99922744-100A -Stainless St..
The Elcometer 266 holiday detector can be used to test porosity on coatings up to 7 mm (275 mils) thick and is ideal for inspecting coatings..
Displays the depth and orientation of the reo bars. Standard search head. 40mm diameter bar depth 15 to 95mm. 8mm diameter bard depth 8 t..
Set of 4 x a-6A Mini Clamps suitable for Elspec G4500 unit..
Portable PQA with GPS receiver to to measure, store & analyze (continuously) waveform signals. Includes G4500 with 4x 3000A Flexible Cur..
Will configure, test, and diagnose your HART and Foundation FieldBus devices. Able to communicate with any device, by any manufacturer. I..
The Emerson AMS Trex is an intrinsically safe HART and Foundation Fieldbus device communicator. It allows technicians to configure, isola..
Intrinsically safe HART device communicator. Allows technicians to configure, isolate, diagnose and repair problems while devices continue t..
Hand-held fusion splicer, can splice from 1 to a maximum of 12-ribbon fibre. Protection sleeve shrink time is 35 seconds for ribbon fibre..
The Fitel S179 is a handheld core-alignment fusion splicer for single and multimode fibres. It includes an S326 cleaver. Typical 6 s splice ..
Fitting set (max pressure = 10,000psi) for pressure calibrators. Female connector sizes:- 1/4"BSP & NPT; 1/8"BSP & NPT; 3/8"BSP &..
Measurement resolution to 0.01mm Shaft diameter range 25 to 175mm using an extension chain 25 to 450mm. Maximum distance between measurement..
-20 to 650°C, IR and MSX resolution 320 x 240, 60 Hz. NETD 50 mK. 2 and 4x digital zoom. Visual image 3.1 MP, built-in LED lamps, l..
-20°C to 650°C, IR resolution 320 x 240, 30 Hz. Display 10 cm, 640 x 480 touchscreen, 1-4 continuous digital zoom, video recordin..
FLIR high performance thermal imaging camera. Features include an on-board 5 MP visual camera, 640 x 480 thermal resolution, 8X continuous z..
The Fluke 1587 Insulation Multimeters combine a digital insulation tester with a full-featured True RMS digital multimeter. Insutation: M..
Measure total earthing resistance (RA) with 3 or 4-pole Fall of Potential method, selective earth resistance measurement and 4-pole soil res..
Earth ground loop testing and continuity testing without breaking the circuit. Ground loop resistance range 0.025ohm to 1.5KOhm. Ground le..
The Fluke 1653B Installation Tester verifies the safety of electrical installations in domestic, commercial, and industrial applications...
Fluke 1663 Installation Tester. Provides the foillowing tests Continuity test under 200mA, Loop Impedence without triggering an RCD can be s..
Fluke 3 phase power logger with Fluke connect mobile app. Includes 4x 1500 amp flex probes (1 A to 150 A . 1 A resolution 30 mA accuracy)..
Fluke 200 MHz 2.5 GS/s (1.25 GS/s 4ch), 4 channel digital oscilloscope with DMM. Features Persistence mode, Connect-and-View triggering f..
Ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits and locating interruptions and short-circuit..
The Fluke 233 is a digital multimeter with a remote display. The removable display has a range of 10 m, allowing the user flexibility when t..
Fluke 28II Ex Intrinsically Safe Multimeter is a completely sealed IP67 rated case. For use inside and outside of hazardous zones. ..
Ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems. Low-pass filter and hig..
Fluke 376 True-RMS 2500A AC & 1000A DC Clamp meter, includes a flexible current probe. will record Min Max and Average. Measure AC vo..
Power Quality Analyser to suit a broad range of ac mains studies. Includes 4 x 600/6000A ac CTs. A unique energy loss calculator provides..
Power Quality Analyser function to suit a broad range of ac mains studies. Includes 4 x 600/6000A ac CTs. A unique energy loss calculator pr..
Fluke 481 radiation monitor. Provides exposure measurements in mR/hr to 50 R/h (0.5 Sv/hr). Detects skin-dose, deep-dose and X-ray radiat..
Fluke 54 series 2 dual input digital thermometer with data logging. Will take most TC inputs. Accuracy +/-0.05% of reading +0.3 degreeC. ..
Calibrator sources direct voltage & current, alternating voltage and current, with multiple waveforms and harmonics, 2 simultaneous vo..
Calibrator sources direct voltage & current, alternating voltage and current, with multiple waveforms and harmonics, 2 simultaneous v..
Temperature measurement range from -30 to 900°C. with USB interface. 60:1 distance to spot ratio with dual laser sighting for fast, accur..
Fluke 63 non-contact mini IR thermometer with 12:1 distance to spot ratio and a temperature range from -32 to 535c. Delivers 1% accuracy and..
DC voltage measurement 0.025%, 300V max, source 0.02%, 11V max. DC current measurement 0.025%, 110mA max, source 0.01%, 22 mA max. Resist..
Documenting process calibrator. DC voltage msmt. 0.025% 300 V max, source 0.02% 11 V max. DC current msmt. 0.025% 110 mA max, source 0.01..
Precision Multifunction Process Calibrator. DC voltage msmt. 0.010% 30 V max, source 0.010% 20 V max. DC current msmt. 0.010% 24 mA max, ..
The Fluke 726 precision multifunction process calibrator is designed specifically for the Process industry with broad workload coverage, ..
Fluke 753 calibrators provides simultaneous source and measure volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate ..
Fluke 754 with HART offers simultaneous source and measure capabilities for all common process parameters. Measure/source volts, mA, RTDs, ..
Measure 4-20 mA control lines, PLC loops, transmitters or any 4-20 mA line without breaking the loop. Capable of 0-20.99 mA and 24-100 mA..
Standard multimeter functions with 2 to 20mA sink and source capability, including a 24V supply. HART 250 resistor, 20mA drive into 1,200..
The Fluke 80i-110s ac/dc current clamp is designed for oscilloscopes that uses a Hall effect cell for the measurement of dc or ac current..
Unique function for accurate voltage and frequency measurements on adjustable speed True-rms ac voltage and current for accurate measurem..
Compatible with any Fluke scopemeter test tool, power harmonics analyser, oscilloscope, multimeter or other voltage measurement device th..
Fluke Metrology dry well calibrator, temperature range -25 to 140°C. The 9103 is stable to ±0.02 °C, and its display is calibrated to an ..
Fluke Metrology dry well calibrator temperature range -45 to 140°C. Display accuracy ±0.1°C, stability ±0.005°C full range, resolution 0...
Indoor air quality (IAQ) monitoring, measure temperature, humidity, CO and CO2 concentrations. Humidity range 10 to 90%, temperature rang..