Your cart is empty!
Data & Telecommunications test and measurement equipment is available for you to rent for short or long term. Often we will add equipment to our rental inventory if there is a specific requirment for equipment we do not have in the rental fleet.
Anritsu MT9085A Access Master quad wavelength OTDR. 850/1300 nm (29/28 dB) and 1310/1550 (39/37.5 dB). Singlemode port is SC/APC. Inte..
Hand-held fusion splicer, can splice from 1 to a maximum of 12-ribbon fibre. Protection sleeve shrink time is 35 seconds for ribbon fibre..
The Fitel S179 is a handheld core-alignment fusion splicer for single and multimode fibres. It includes an S326 cleaver. Typical 6 s splice ..
Fluke multi and singlemode (CFP-Q-ADD) optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 850, 1300, 13..
Fluke CFP-SM optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 1310 and 1550 nm in 3 s. A set refer..
The Fluke DSX-5000 1 GHz cable analyser copper test solution enables testing and certification of twisted pair cabling for up to 10 GigE ..
Fluke DSX-8000 2GHZ cable analyser copper test solution enables testing and certification of twisted pair cabling for up to 40 GigE deployme..
Fluke SimpliFiber FTK1000 fibre test kit. Light source is multimode 850nm and 1300nm. Power meter has 850/1300nm multimode and 1310/1550nm s..
Multi and singlemode OTDR. Designed for testing, troubleshooting and certifying multi and singlemode 62.5, 50 and 9um fibre optic network..
Fujikura FSM70R+ 12-core ribbon fibre fusion splicer. Typically splice time 15 seconds and sleeve shrink time 40 seconds. Detachable work ta..
Fujikura FSM70S single fibre core alignment fusion splicer and CT30A cleaver. Typical splice losses of 0.02 dB and 0.01 dB on single and ..
Fujikura FSM70S+ single fibre core alignment fusion splicer and CT50 cleaver. Typical splice losses of 0.02dB and 0.01dB on single and multi..
Fujikura FSM90S+ (Active Fusion Control) single fibre core
alignment fusion splicer and CT50 Bluetooth cleaver. Typical splice losses of
JDSU,MTS-2000 with JDSMTS-4136MA-FCOMP-SCA OTDR module. Maintain metro and PON-based FTTx networks. 1310, 1550 and 1625 nm wavelengths at..
JDSU OLP-87 PRO is a FTTx/PON power meter with P5000i inspection probe. Used for qualification, activation, inspection and troubleshootin..
Kit consists of Encircled Flux (EF) compliant test reference leads for the following fibre networks:
- SC, ST 62.5 um (OM1 &..
The NetAlly AirCheck G2 is a simple to use, handheld wireless tester that allows users to quickly verify and troubleshoot 802.11 a/b..
The EtherScope nXG-300 Portable Network Expert is a multi-technology, all-in-one handheld network analyzer that enables engineers and techni..
The MTX150x is a self-contained Ethernet services test solution for Layer 1 to 4. Required by field technicians to install, verify, maintain..
Viavi Multi and Singlemode OTDR, 850/1300nm and 1310/1550nm with a SC connector and dynamic ranges 26/24 dB and 37/35 dB respectively. The f..
Viavi Single-mode OTDR 1310/1550/1625nm with dynamic ranges 40, 40 and 38 dB respectively. This model has the MA2 fibre module, housed in th..
The OneExpert CATV 620 is an approved signal analysis meter for verifying and troubleshooting network performance on the NBN and Telstra HFC..
SmartClass 4800 Ethernet tester for the installation, turn up and maintenance of Ethernet IP services up to 1 Gbit electrical or optical. Th..
The Viavi SmartClass Ethernet tester is used for the installation, turn up, and maintenance of Ethernet IP services up to 1 Gbit electric..