Your cart is empty!
General Industrial testing equipment is available to rent for short or long term periods. Available to suit an array of industries and measurements. Please call if you do not see what you are looking for.
Beamex CMX Light calibration software for single workstation. ..
NATA certified MC5 provides calibration capability for pressure, temperature, electrical and frequency signals. HART communication and CMX..
NATA certified MC5-IS provides calibration capability for pressure, temperature, electrical and frequency signals. HART communication and..
NATA certified MC6 provides calibration capability for pressure, temperature, electrical and frequency signals. HART communication and CM..
NATA certified MC6 provides calibration capability for pressure, temperature, electrical and frequency signals with HART communication and D..
135M-12 Strobex to suit Chadwick Helmuth Vibrex 2000 kit. For setting the timing on helicopter rotor blades. ..
Intrinsically safe pressure calibrator. Displays real-time recorded data graphically on a high res screen with ability to zoom into speci..
Crystal XP2i 15psi (1bar) pressure gauge and Druck PV411 hand pump calibration kit. Nata certified accuracy, ±0.1% of reading between 20 t..
Crystal XP2i 5,000psi (345bar) pressure gauge and Druck PV411 hand pump calibration kit. Nata certified accuracy, ±0.1% of reading between..
Range -1 to 138 bar (2,000 psi) Nata certified pressure gauge. Accuracy, +/-0.1% of reading between 20 to 100% of full scale, +/-0.02% of..
Range 20Bar resolution 1mBar. Accuracy 4 to 20Bar +/-0.1% of reading. 0 to 4Bar +/-4mBar. It Has a 6000 point logging capability. Logging..
Range 210Bar resolution 0.01Bar. Accuracy 40 to 200Bar +/-0.1% of reading. 0 to 40Bar +/-0.04Bar. Has a 6000 point logging capability. Lo..
Range 700Bar resolution. 0.01Bar accuracy. 1% of reading. Has logging capability. 6000 point pressure logging capability. Logging interva..
Range 700Bar resolution. 0.01Bar accuracy. 1% of reading. Has logging capability. 6000 point pressure logging capability. Logging interval ..
Range 70Bar resolution 0.001Bar. Accuracy 14 to 70Bar +/-0.1% of Reading 0 to 14Bar +/-14mBar. Has a 6000 point logging capability. Loggi..
Range 7Bar resolution 0.1mBar. Accuracy 1.4 to 7Bar +/-0.1% of reading. 0 to 1.4Bar +/-1.4mBar. Vacuum +/-17.5mBar. Has a 6000 point logg..
Measures voltage, current, resistance and frequency. Up to 15 analog sensor inputs. Each channel is independent and supports: one isolate..
Includes a built in GSM modem for internet access to the device. Measures voltage, current, resistance and frequency. Up to 5 analogue (±..
Analog inputs 32 isolated and 48 single ended inputs. 2x 4 digital input types. 2x serial sensor ports, Modbus capability, , 4x SDI12 cha..
Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. Generates from ..
Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. Generates from..
Druck DPI 620 Genii advanced modular pressure calibrator with HART, includes pneumatic pressure station with 1/8 BSP(G) or 1/8 NPT test p..
The Druck DPI 620 Genii is an electrical, frequency and temperature calibrator with HART communicator. Provides simultaneous measurement ..
Pneumatic pressure calibrator including pump and current voltage standard. Pressure range -1~20 bar +/- 0.025% FS. Voltage input +/- 50 V..
Hydraulic pressure calibrator including pump and current voltage standard. Pressure range 0 - 350 bar (5000 psi) +/- 0.005% FS. Voltage inpu..
Fully self-contained pressure test and calibration system combines pressure generation, signal measurement, and loop power. Generates fro..
Druck DPI620 Genii advanced modular pressure calibrator with HART, includes hydraulic pressure station with 1/8 BSP(G) or 1/4 NPT test po..
Provides up to 700 Bar hydraulic, 40 Bar pneumatic pressures and vacuum to -950 mBar. Built-in stroke adjuster, lower pressure fine contr..
Will configure, test, and diagnose your HART and Foundation FieldBus devices. Able to communicate with any device, by any manufacturer. I..
The Emerson AMS Trex is an intrinsically safe HART and Foundation Fieldbus device communicator. It allows technicians to configure, isola..
The AMS Trex is an intrinsically safe HART device communicator. It allows technicians to configure, isolate, diagnose, and repair problems w..
Fitting set (max pressure = 10,000psi) for pressure calibrators. Female connector sizes:- 1/4"BSP & NPT; 1/8"BSP & NPT; 3/8"BSP &..
Measurement resolution to 0.01mm Shaft diameter range 40 to 150 mm using an extension chain 150 to 500 mm. Maximum distance between measu..
Measurement resolution to 0.01mm Shaft diameter range 25 to 175mm using an extension chain 25 to 450mm. Maximum distance between measurement..
Flexim ultrasonic flow meter is a clamp-on transit time gas and liquid flow meter, 2-channel, with Zone 2 Ex-certification for use in haz..
-20 to 650°C, IR and MSX resolution 320 x 240, 60 Hz. NETD 50 mK. 2 and 4x digital zoom. Visual image 3.1 MP, built-in LED lamps, l..
-20°C to 650°C, IR resolution 320 x 240, 30 Hz. Display 10 cm, 640 x 480 touchscreen, 1-4 continuous digital zoom, video recordin..
Flir E8 Infrared Thermal Image Camera -20 to 250°C, IR and MSX resolution 320 x 240, 9 Hz, NETD <60 mK. Infrared camera applications i..
FLIR high performance thermal imaging camera. Features include an on-board 5 MP visual camera, 640 x 480 thermal resolution, 8X continuous z..
Fluke-700PD3 dual pressure module, range ±350 mbar differential or gage, reference uncertainty 0.04%, connection 1/4 NPT. Suitable for us..
Fluke 54 series 2 dual input digital thermometer with data logging. Will take most TC inputs. Accuracy +/-0.05% of reading +0.3 degreeC. ..
Temperature measurement range from -30 to 900°C. with USB interface. 60:1 distance to spot ratio with dual laser sighting for fast, accur..
For use with the Fluke 744 & 725 industrial calibrators. Range 0 to 690 bar, reference uncertainty .025%. Connection 1/4NPT and 1/4 I..
For use with the Fluke 744 & 725 industrial calibrators. Range 100 to 690kPa, reference uncertainty .025%. Connection 1/4NPT and 1/4 ..
For use with the Fluke 744 & 725 industrial calibrators. Pneumatic system range 0 to 70Bar, resolution 7mBar, reference uncertainty 0..
DC voltage measurement 0.025%, 300V max, source 0.02%, 11V max. DC current measurement 0.025%, 110mA max, source 0.01%, 22 mA max. Resist..
Documenting process calibrator. DC voltage msmt. 0.025% 300 V max, source 0.02% 11 V max. DC current msmt. 0.025% 110 mA max, source 0.01..
Precision Multifunction Process Calibrator. DC voltage msmt. 0.010% 30 V max, source 0.010% 20 V max. DC current msmt. 0.010% 24 mA max, ..
The Fluke 726 precision multifunction process calibrator is designed specifically for the Process industry with broad workload coverage, ..
Fluke 753 calibrators provides simultaneous source and measure volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate ..
Fluke 754 with HART offers simultaneous source and measure capabilities for all common process parameters. Measure/source volts, mA, RTDs, ..
Measure 4-20 mA control lines, PLC loops, transmitters or any 4-20 mA line without breaking the loop. Capable of 0-20.99 mA and 24-100 mA..
Standard multimeter functions with 2 to 20mA sink and source capability, including a 24V supply. HART 250 resistor, 20mA drive into 1,200..
Fluke Metrology dry well calibrator, temperature range -25 to 140°C. The 9103 is stable to ±0.02 °C, and its display is calibrated to an ..
