Your cart is empty!
Rent short or long term Electrical Power testing equipment to suit a range of industry measurements. If you do not see what you are looking for please call our technical sales team who will assist you with your enquiry.
The ALL-TEST5PRO is a comprehensive electrical motor circuit analyser designed for stand alone troubleshooting, and QA of stored new or r..
Weatherproof compact power analyzer & logger. Certified to IEC61000-4-30, Class A. Includes WiFi and mobile interfaces and GPS time sync..
Weatherproof IP65 field unit. Channels: 3 voltage, 63 to 440V (isolated). 4 current 0 to 3,000A (3ph and neutral) RMS. Supplied with 4 fle..
Single phase variac. 240 V ac input, 0 to 270 V ac output at 17 A. Input and output connections must be wired up under a prot..
Set of 4 current clamp/probes, range 0 to 10A RMS. Max conductor size 12mm dia. Suitable for power quality analysers DRA-BMI,PG4400, DRA-..
Multi-function Partial Discharge (PD) Instrument. It measures accurate PD activity using the UltraTEV detector and an ultrasonic detector. ..
Portable PQA with GPS receiver to to measure, store & analyze (continuously) waveform signals. Includes G4500 with 4x 3000A Flexible Cur..
The Fluke 1587 Insulation Multimeters combine a digital insulation tester with a full-featured True RMS digital multimeter. Insutation: M..
Measure total earthing resistance (RA) with 3 or 4-pole Fall of Potential method, selective earth resistance measurement and 4-pole soil res..
Earth ground loop testing and continuity testing without breaking the circuit. Ground loop resistance range 0.025ohm to 1.5KOhm. Ground le..
The Fluke 1653B Installation Tester verifies the safety of electrical installations in domestic, commercial, and industrial applications...
Fluke 1663 Installation Tester. Provides the foillowing tests Continuity test under 200mA, Loop Impedence without triggering an RCD can be s..
Fluke 3 phase power logger with Fluke connect mobile app. Includes 4x 1500 amp flex probes (1 A to 150 A . 1 A resolution 30 mA accuracy)..
Ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits and locating interruptions and short-circuit..
Ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems. Low-pass filter and hig..
Fluke 376 True-RMS 2500A AC & 1000A DC Clamp meter, includes a flexible current probe. will record Min Max and Average. Measure AC vo..
Power Quality Analyser to suit a broad range of ac mains studies. Includes 4 x 600/6000A ac CTs. A unique energy loss calculator provides..
Compatible with any Fluke scopemeter test tool, power harmonics analyser, oscilloscope, multimeter or other voltage measurement device th..
A pack of 3 pieces of the i5s 5 A ac current clamps, specially configured to provide low current accuracy while taking measurements on se..
Single phase power quality analyser. Records RMS, transients, flicker & harmonics up to the 32nd. Selectable logging periods from 1 s..
Portable (16kg control unit, 39kg HV tank) hipot tester, 100kV, 50Hz, rated 3kVA into capacitive loads. Features continuously adjustable ..
Single, portable (34kg) unit suited for testing overhead apparatus, vacuum bottles and interrupters, switch gear, bus duct, motorized vac..
The PFT301CM is a portable HiPot 0 to 30 kV ac 1 kV A resistive/capacitive load: 33 mA. Duty cycle at 1 kV A 1 h on, 1 h off 700 V A Cont..
Ranges 200A/2kA AC/DC. Measure volts, ranges 30V, 300V & 600V AC/DC. Frequency ranges 10Hz, 100Hz & 1kHz. Display LCD, counts max..
Takes on-the-spot measurements of the internal resistance, voltage and temperature of lead-acid batteries, principally for UPS and simila..
Rated primary current 5A AC. Amplitude accuracy +/-0.5% rdg. +/-0.2% fs (at 45 to 66Hz), 66Hz to 5kHz +/-1% or less. Max circuit voltage ..
Hioki PW3360-21 power logger supports single to three phase 4 wire circuits. Supplied with 3x 500 A CTs 5/10/50/100/500 A ranges 0.3% rdg..
Premium Power Quality Analyser for demanding applications. Includes 3 x 1000A ac CTs and 1 x 200A ac/dc CT. Ideal for ac mains studies as..
Measures voltage, current, power, power factor, harmonics and integrated values. Simultaneously performs demand measurements required for..
Optional Accessory for HVD,HVA60-DC/VLF and HVD,HVA90_DC-VLF. Tan Delta or Power Factor tester used to determine the power factor of cabl..
VLF(0.1Hz), DC(+/-), cable fault conditioning (burning), and sheath/jacket testing mode all included. 0.1Hz & 0.02Hz. For solid dielec..
VLF and DC test capabilities combined in one unit (60 kg). Suitable for testing cables (XLPE, PE, EPR, PILC etc), capacitors, switchgear,..
VLF, DC and Jacket/Sheath testing. Sinusoidal: 0 - 94 kV peak, 0 - 66 kV rmsDC: ± 0 - 90 kV and Squarewave: 90 kV. The high power HVA94 Test..
ISA Circuit Breaker Analyser, 16 timing channels (6 main contacts, 6 Resistive contacts, 4 Aux contacts), up to 3 trip/1 close coils, mot..
Hipot testing up to 10kV in either DC or AC. Digital voltmeter and ammeter, digital timer. Window comparator for more reliable pass/fail ..
Relay test set for 3 ph protective relay equipment. Current ranges to 105 A. ac outputs to 900 V and dc outputs to 900 V. Power Factor &a..
Portable (22 kg, 38 kg with accessories and transport case) battery discharge load unit. Works with 12 V to 480 V battery systems and can..
The Megger MWA330A Winding Resistance Analyser combines TTR and resistance testing in a single unit. It performs the following tests: three-..
Provides reliable cable identification for both energised and non-energised cables. It can generate pulses on 440 V 3 phase cables.
The Megger CAL 300 is exclusively used for calibration of Megger IDAX Insulation Diagnostic Analysers.
Megger CSU600AT, 600 A Current Supply Unit, including Timer option. Current supply, 100 A @ 9.0 V 1 h, 600 A @ 6.5 V 30 s.
Four pole soil resistivity testing kit. IP54 rated, 2, 3 and 4 point testing. Selectable 25 V or 50 V output, complete with lead and stak..
Megger Digital Low Resistance Ohmmeter 10A/0.1microohm-2KOhm Self contained automatic micro-ohm meter, selecting the most suitable test cu..
Measures resistance between 0.1 micro-Ohms and 1Ohm, at high currents. Provides test currents from 10A to 600A subject to the load resist..
For Megger DLRO digital micro-ohm meters, potential spike lead set 2 x 2m long & current clip lead set 2 x 2m. These are used to sepa..
For Megger DLRO 10 series digital microohm meters. Specially designed for measuring resistance of lightning protection circuit between wi..
Test current range 10A to 200Adc. Measurement range 0.1micro-Ohm to 1Ohm, resolution 0.1micro-Ohm. Current cables 2 x 5m. Internal memory..
Megger EZ-Thump 12 kV Hipot tester, TDR and Thumper. This unit is designed as a portable cable fault finder. It operates off either ac su..
Megger Freja300 Secodary Relay Tester. All tests can be configured from the front panel. Accuracy typically 0.01%. Freja Win software suppli..
The IDAX 300 provides an accurate and reliable condition assessment of insulation in transformers, bushings, generators, and cables. It u..
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to..
Measures to 20 Tohm at 10 kV. Tests include PI, DAR, DD, SV and ramp test. Li-ion battery with rapid charge, mains operation possible whi..
15 kV dc Insulation Resistance Tester. Measures to 30 Tohm at 15 kV. Tests include PI, DAR, DD, SV and ramp test. Li-ion battery with rap..
Light and compact 50V to 5,000V insulation resistance tester. Measures up to 10 Tera ohms. Diagnostic testing and maintenance of high vol..
The Megger MOM2 is a lightweight (1 kg), handheld micro-ohmmeter. Up to 220 A test current, auto ranging from 999 µohm to 1000 mohm fs. R..
Test voltage 80kV max at 61.8Hz. Fully automatic operation. Rechargeable batteries. RS232C interface.
Portable Appliance Tester. Battery operated. This instrument does the full range of PAT tests required. Includes 10 mA & 30 mA portab..
Megger PAT420 portable Appliance Tester. Tests to AS3760. Stores data on USB memory stick. Includes a barcode scanner and label printer.
Tests standard, DC, selection and programmable RCDs. Ramp testing. Auto (remote) testing. 3ph safe. Enables testing on 110V centre tapped..
High output current 5mA for fast charging of capacitive loads. Testing up to 10kV, mains or battery powered, digital/analogue backlit disp..