Your cart is empty!
Measures resistance between 0.1 micro-Ohms and 1Ohm, at high currents. Provides test currents from 10A to 600A subject to the load resistance and supply voltage. A large backlit liquid crystal display provides all the information needed to perform a test; all test parameters and measurement results are displayed. Range: 0.1micro-Ohms to 999.9mW [subject to supply voltage and load resistance]. Accuracy: Voltage ±0.5% ± 0.1mV. Current ±0.5% ± 0.1A. Resistance: Better than micro-Ohms to 100mW. Output Current: [refer to data sheet chart for detail]. Power supply for: full output: 207 to 265V 50/60Hz with a load less than 7mOhms including current leads [i.e. standard 5m 50mm² current leads only, 4mOhms load]. Reduced output: Down to 100V 50/60Hz [refer to data sheet for detail]. Test Current Range: 10A to 600A unsmoothed DC in 1A steps. Accuracy: ±2% ±2A. Test Modes: Manual, Auto, Continuous. Test Time: 7 seconds NORMAL /AUTO mode. Refreshed every 2 seconds in CONTINUOUS mode. Voltmeter input impedance: >200kW. Data Transfer: Real time or batch download via RS232 using AVO Download Manager. Storage Capacity: 300 result sets...
Earth ground loop testing and continuity testing without breaking the circuit. Ground loop resistance range 0.025ohm to 1.5KOhm. Ground l..
For Megger DLRO digital micro-ohm meters, potential spike lead set 2 x 2m long & current clip lead set 2 x 2m. These are used to sepa..
Megger DLRO100XB - 100A lightweight, mains and battery operated digital low resistance ohmmeter. Unit is supplied with 5m kelvin lead set, D..
DET2/3 Earth Tester with ETK50C kit. High resolution of 1 mO, ideal for large earth (ground) systems. High accuracy for earth (ground) elect..
Tags: dlro 600a, megger dlro 600, low resistance meter, micro-ohm meter